Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping  To be determined
Total
Continue shopping Proceed to checkout

How to assemble your furniture

Most of our furniture comes pre-assembled, however dining tables and loungers will require minimal assembly.

Circular dining table

  •  4 screws
  • Allen key
  • Plastic inserts for parasol hole

The table base is pre-assembled and made of 4 panels. Lay the table top on a safe and secure surface glass-side down and place the base onto the back of the table top.

Screw in the bolts through a washer to the table top to secure and tighten all the fastenings. Carefully turn the table over, holding onto the glass, to place on a level and stable surface.

Rectangle dining tables (with 6 chairs)

  • 12 screws
  • Allen key
  • Plastic inserts for parasol hole

The table base is made up of 4 panels, each having 2 brackets to connect to the opposite side. Using the bolts provided, thread 1 bolt through a washer and fasten with a nut loosely to make the base form. Lay the table top on a safe and secure surface glass-side down and place the constructed base onto the back of the table top. Screw in the bolts through a washer to the table top to secure and tighten all fastenings. Carefully turn the table over, holding onto the glass, to place to a level and stable surface.

Rectangle dining table (with sofa set)

  • 12 screws
  • Allen key

The table base is made up of 4 panels, each having 2 brackets to connect to the opposite side. Using the bolts provided, thread 1 bolt through a washer and fasten with a nut loosely to make the base form. Lay the table top on a safe and secure surface glass-side down, and place the constructed base onto the back of the table top. Screw in the bolts through a washer to the table top to secure and tighten all fastenings. Carefully turn the table over, holding onto the glass, to place on a level and stable surface.

  Loungers

When your loungers arrive, you'll need to fit the headrest. In your box, you'll find:

  • 1 x lounger back piece
  • 2 x bolt and nut
  • 2 plastic spacers

Line up the lounger back piece with the base, insert bolt from outside using plastic spacer and fit nut. Tighten with key and spanner provided.

Corner sofas

Our three piece sofas push together to create the large corner.

All of our corner sofas (bar the Platinum range) come with clips to keep them together. You should receive a white box with two clips in.

The Platinum range has wider feet which keep them pushed together so there is no need for the clips (the Platinum range is actually too wide for these clips).

Assembly Instructions